HK Parts | HK MP5-10 MP5-40 and MP5-.357 and Clones

MP5/10 MP5/40 & MP5/.357 & Clones

Questions Or Need Help With Your Clone Or Factory HK? Give Us A Call!

Just In!!! We Have 100% German HK MP5 40 (minus the receiver) Complete Parts Kits In Stock Starting at $1500. E-mail To Get Yours Today!

MP5 40/10/.357 Factory Correct Extractor Spring $10

MP5 40/10/.357 Latest Production 1.4mm Extractor $50

MP5 40/10/.357 Factory Correct "Satin" Hammer Spring $12

MP5 40/10/.357 Factory HK Ejector Lever $50

HK German 40.10.357 Factory Ejector Lever Spring $7

MP5 40/10/.357 Maintenance/ Repair Pack Includes: Ejector Lever, Extractor, Extractor Spring, 40/10 Hammer Spring $115

HK German Trip Lever That Has Been Modified & Polished To Allow Use Of An HK Registered Sear Pack With Any Of The MP5 40/10 or HK21 Host Gun Variants $25. You Have To Have This For The HK Sear Pack To Work On Any HK MP5 40/10 or .357 & Even HK21 Firearms.

MP5 40/10/.357 Firing Pin $45

MP5 40/10/.357 Firing Pin Spring $12

MP5 40/10/.357 Roller Retainer "S" (Serpentine) Spring $13

HK Roller Retainer Spring Pin (Holds Spring in Place) $7

HK German Semi- Auto Elbow Spring With Roller $19

MP5 40/10/.357 A3 Stock Replacement "H" Buffer $25

HK German Factory Thread Protector For All MP5 40/10 Factory (Metric 14 X.75 Right Hand Twist) Threaded Barrels $45

HK German MP5 40/10 Rear Sight Drum. Replace That G3 Drum On Your Clone With The Factory Correct Rear Site Drum $65

HK Chamber Face Cleaning Brush $30

HK German MP5 40/10 Flute Chamber Cleaning Brush $30

HK "Retimed" Hammer Needed For All HK Registered Sear Conversions. Protect Your Valuable Investment By Using The Proper Retimed Hammer For Your Sear Pack. These Will Fit All SEF/Navy Non-Burst Trigger Packs. The Picture Above Shows The "Retimed" Hammer On The Left Side Installed. A Non-Timed Hammer On The Right (Notice How High The Hammer Sits) The Sear Pack On The Right Is Not Timed Properly While The Pack On The Left Is In The Correct Nearly Flat/Horizontal Rearward Position. $95

HK German Factory XX Marked Strutted Hammer $115

MP5 40/10/.357 & MP5F Cocking handle $65

HK German MP5 40/10/.357 Cocking Tube Support $85

MP5 40/10/.357 Cocking Support/Handle Spring $10

MP5 Cocking Tube End Caps (Dust Caps) $25

HK German Push Pins for Forearm (Small) Buttstock (Large) $5 each

HK Ambidextrous Sling Pin Small (Forearm)

Large Sling Pin (Replaces Stock Push Pin) $45 Each

HK German Front Sight Tower Sling Loop $25

HK German Barrel Retaining Pin (Holds Barrel In Trunnion) $10

HK German Case Deflector Rivets $10 Each

MP5 40/10/.357 30 Round Magazine Latest Production $65

HK German MP5 40/10/.357 Magazine Clamp $75

HK Vented Forearm With Our Own Exclusive Vented Design. Ideal For That Unique Look As Well As Helping Keep Your Barrel Stay Cool $79

HK MP5 40/10/.357 Wide Forend $45

HK Surefire Lighted Forend W/ Offset Adapter For Use W/ Sound Suppressor Or Fake Suppressor $255

HK Surefire 628 Lighted Forend For MP5's/HK94's & Clones Will Fit All MP5's, 53's 51's, Clones, Etc $225

HK Surefire 629F Lighted Forend With Contact ON/OFF Switch & Pressure Pad (has both on/off options) Surefire's Best MP5 Model $365

MP5 Tri-Rail Forend Surefire Rail System $145

Tri-Rail Shown Mounted On An MP5 Will Also fit Other HK's Such As HK53's, 51's Etc.

Tri-Rail Picture Of Bottom Angle On MP5

Knights Armament Factory NIB Vertical Grip Fits Any Standard Rail System Or Picatinney Rail $50

MP5 40/10/.357 High Impulse Locking Piece #25 $125

MP5 40/10.357 Low Impulse LO #24 Locking Piece (90 Degree) $125

Rare HK German (#26) Locking Piece (80 Degree) $125

MP5 40/10/.357 Recoil Rod Assembly Complete $98

MP5 40/10/.357 Recoil Rod Bushings (Black) $10 Each

MP5 40/10/.357 Rear Sight Adjustment Tool $75

MP5 40/10/.357 Factory 3-Lug Flash hider $115

HK MP5 Armorers Maintenance Manual (90 Pages) $25

HK Burst Trigger Group Armorers Manual $25

HK German MP5 40/10 SEF Navy Style Clipped & Pinned Housing Ready With Bolt Hold Open Cutout & Ready To Install $145

HK SEF Selector Lever For SEF Style Polymer Housings $40

HK German SEF C/P Semi-Auto Trigger Group Complete Set Up For Your MP5 40/10 Or Clone. Shown Installed On MP5 40/10 $435

HK German MP5 40/10 4 Position (0,1,2,Full) Trigger Group Complete NEW $625

HK German MP5 40/10 FBI (0,1) Trigger Group Complete $595

HK German MP5 40/10/.357 3 Position (0,1,F) Trigger Group Complete $625

Your Choice of 3 Position Or 4 Position Clipped & Pinned Housing (To Get The Look And Feel Of The Factory HK F/A Trigger Groups ONLY SEMI AUTO ONLY. Same Trigger Group Above Only Clipped & Pinned With a SEMI Only Factory HK Trigger Pack And Set Up For Your Choice Of Caliber $625

HK German MP5 3 Position Navy Pictogram Lower Housing Clipped & Pinned Ready For Your Trigger Pack (same Housing above) $145

HK German Grip Cleaning Kit. Fits All "Navy" or Pictogram Lower Housings. Also Great For Storage Of Spare Parts, Paperwork, Etc. Comes Complete As Shown $65

HK German Thread Protector Holder Fits In Grip Housing $30

HK German MP5 40/10 Bolt Head Complete $325

MP5 40/10/.357 Factory F/A Bolt Carrier $345

MP5 40/10/.357 Bolt Lock Roll Pin (2 X 6mm) $9

MP5 40/10/ Threaded Bolt/ Mag Follower Catch Screw (W/ Factory Installed Loctite) These Are Great To Have Spares Of $16

MP5 40/10/.357 Bolt Hold Torsion Spring $11

MP5 40/10 F A3 Retractable Rear Stock With BHO Cutout $450

MP5 40/10/.357 Factory HK Marked Folding Stock $295

HK Choate Folder For MP5 40/10 With Needed "H" Buffer For Added Recoil & Protection To Your Receiver Using 40/10 Ammo. Comes W/ Sling Swivel & Buffer Complete $125

HK German MP5/94 A1 End Cap W/ Sling Swivel (Perfect For Pistol Builds) $120

Choate MP5 40/10 Buffered End Cap W/ "H" Buffer Must Have To Protect Your 40/10 From "Dimpling" $35

Replacement/Spare Buffer For Choate End Cap Or Choate Rear Stock $5

HK B&T Folding Stock For all MP5 Variants $245

HK German MP5 40/10 A2 Fixed Rear Stock $95

Low Profile MFI (U.S. Made) Manufactured HK Mount. This Mount Will Also Fit Any HK's Or Clones. The Lowest Profile HK Weapon Optics Mount Available. Comes W/ Mounting Hardware & Detailed Mounting Instructions $125

Picatinney Scope Rail For Mounting Optics. B&T Style Mount is "Universal" & Will Fit All In Spec Receivers (Comes As Shown With Everything Needed For Install) $45

Top View Of The HK "Universal" Scope Mount

Underside View of the HK "Universal" Scope Mount

Best Optic Choice For The MP5 Platform & Fit Any Of The Scope Rails Offered. HK Parts Gives Them 2 Thumbs Up! This Is What We Use & We Have Tried Them All.

NIB Eotech 512 Uses AA Batteries $399

NIB Eotech 552 Uses AA Batteries Has Night Vision Settings $479

NIB Eotech 511 Uses "N" Batteries $359

NIB Eotech 551 Uses "N" Batteries Has Night Vision Settings $419

MP5/94 3 - Point Sling Factory HK Green $65

HK German Ambidextrous Factory Sling (these have 2 sling hooks vs. 1 like the 3-point) Best Used W/ Ambidextrous Sling Pins $65

ORDER ONLINE THROUGH OUR SECURE ONLINE SHOPPING CART

Adam@HKPARTS.NET

801.440.5060