HK PARTS Adam Webber 801. 440. 5060

MP5K-PDW / MP5K / SP89/ CLONES

MP5K/SP89 Copper Extractor Spring $10

MP5K/SP89 9mm Extractor (For Bolt Head) $50  

MP5K/SP89 Ejector Lever 3rd Gen (Latest Gen.) $50

HK German 9mm Ejector Lever Spring $7

MP5K/SP89 9mm Firing Pin $45

MP5K/SP89 Firing Pin Spring $12

HK German Multi Wire Firing Pin Spring Much Stronger, Longer Lasting $25

MP5K/SP89 9mm Hammer Springs $12

HK German Roller Retainer Plate $12

HK Locking Roller Pin Fits All HK Bolts. Replace These When You Replace Your Retainer Plate/Spring $7 Each

HK German Action 3 Roller Retainer "S" Wire $13

F Style Roller Retainer Plate Fits Newer Style Bolt Heads $19

HK Locking Roller - 4 , 7.96mm $14

HK Locking Roller  - 2 , 7.98mm  $14

HK Locking Roller Standard 8mm $12

HK Locking Roller +2, 8.04mm $12

HK Locking Roller +4 , 8.04mm  $12

HK Nylon Recoil Rod Guides For Recoil Rods $10

HK German Front Sight Tower Sling Eyelet $25

HK German Barrel Retaining Pin (Holds Barrel In Trunnion) $10

HK German Rear Sight Ball Bearing $5

HK German Rear Sight Spring $5

German Semi/Sear Pack Elbow Spring W/ Roller $19

MP5K PDW Rear Sight Drum (Replace that Factory Incorrect Clone Rear Sight Drum With The Factory Correct Sight) $65

HK German MP5K PDW Rear Sight Assembly $125

HK Red Handled Rear Sight Adjustment Tool $75

HK German Push Pins MP5K/SP89 Only Uses The (Small) Push Pins Only $5  

HK German MP5K / SP-89 Ambidextrous Sling Pin Small For Both The Front & Rear $45

Picatinney Scope Rail For Mounting Optics. B&T Style Mount is "Universal" & Will Fit All In Spec HK Receivers (Comes As Shown With Everything Needed For Install) $45

Top View Of The HK "Universal" Scope Mount

Underside View of the HK "Universal" Scope Mount

Low Profile MFI (U.S. Made) Manufactured HK Mount. This Mount Will Also Fit Any HK's Or Clones. The Lowest Profile HK Weapon Optics Mount Available. Comes W/ Mounting Hardware & Detailed Mounting Instructions $125

MP5K Anti-Rattle Roller Tipped "Paddle" Magazine Release (This is the correct type for 9mm HK's) $65

MP5K Contact Piece For Paddle Mag Release $39

JUST IN NEW ARRIVAL !!!

  U.S Made Dual Magazine Holder Made Specifically For Demanding LE / MIL Applications & Users. Lightweight (1.8 oz) T-6 Tempered Aluminum, Edgeless, Completely Ambidextrous, Simple To Use & Works With ALL Straight OR Curved 9mm Magazines $25

HK German 9mm Magazine Clamp  $75

HK German MP5K 30 Round Curved Magazine LEO Marked Or NON LEO Marked Your Choice $65

HK German Factory MP5K 15 Round Magazine $65

New Beta Mag For MP5K 100 Round Drum Complete System Comes Complete As Shown With Clear Backs (Ammunition Not Included) $295

HK German MP5/94 9mm Magazine Loader/Unloader Set $95

HK German 30 Round Magazine Springs (Great For Spares) $9

HK German 15 Round Magazine Spring $9 each  

HK German MP5K/SP-89 Cocking Tube Support $75

HK MP5K/SP89 U.S. Made Cocking Tube & Support. Each Set In Custom Made. This Is Made With The Highest Quality Material. $275

MP5K/SP89 Cocking Handle $50

HK Cocking Tube End Caps (Dust Caps) $25

HK MP5/MP5K (All Models) Armorer's Manual (90 pgs.) $25

HK Burst Trigger Group Armorer's Manual $25

HK German MP5K-N Red Owners Manuals $18

HK German MP5/MP5K Owners Manual $18

German Flash Hider (For 3-Lug Attachment) $85

HK 3-Lug Adapter 1/2 X 28 Or 1/2 X 32 (your choice) $50 each. The Best 3-Lug Adapter In the HK Industry.                   

1/2 X 28   Or Your Other Option 1/2 X32

MP5K-N Factory German 1/2 X 32 Thread Protector $40

Our Own Thread Protector In Either 1/2 X 28 or 1/2 X 32 Threads As Well As Your Choice Of Knurl, Course (left) Or Fine (Right) These Are Exact Duplicates Of The German Thread Protectors.  $19   

 1/2 X 28 Course Knurl  1/2 X 28 Fine Knurl  

1/2 X 32 Course Knurl   1/2 X 32 Fine Knurl

HK German Thread Protector Holder. Also A Great Way To Store Spare Parts, Paperwork, Etc In The Bottom Of the Navy Or Pictogram Lower Housings $30

HK "Retimed" Hammer Needed For All HK Registered Sear Conversions. Protect Your Valuable Investment By Using The Proper Retimed Hammer For Your Sear Pack. These Will Fit All SEF/Navy Non-Burst Trigger Packs. The Picture Above Shows The "Retimed" Hammer On The Left Side Installed. A Non-Timed Hammer On The Right (Notice How High The Hammer Sits) The Sear Pack On The Right Is Not Timed Properly While The Pack On The Left Is In The Correct Nearly Flat/Horizontal Rearward Position. $95

HK German XX Marked 9mm Strutted Hammer $115

HK German 3 Position Navy F/A Trigger Pack Complete $245

HK German Grip Cleaning Kit. Fits All "Navy" or Pictogram Lower Housings. Also Great For Storage Of Spare Parts, Paperwork, Etc. Comes Complete As Shown $65

HK German SP89/MP5K FBI 0,1 Clipped & Pinned Trigger Group Complete $675

HK SP89/MP5K FBI Trigger Group Shown How It Looks On Weapon $675

HK German SP89/MP5K Safe/Semi (0,1) Only Trigger Pack With The 4 Position Clipped & Pinned Housing. This Option Is Semi Only But Has The Look & Feel Of The F/A MP5K. This Has The Same Internals As The Option Above Only The 4 Position Housing For The Look Of the Origional MP5K F/A Weapon Only Semi Auto Only. Will Fit Any Of The Factory SP89 & Clone Copies. $675

HK German SP89/MP5K Safe/Semi (0,1) Clipped & Pinned Trigger Group Complete With The 3 Position Navy (0,1,F) Housing Option. $675

HK German MP5K 4 Position (0,1,3,F) Burst Trigger Group  $625

HK German MP5K 4 Position (0,1,3,F) Clipped & Pinned Trigger Housing $135 

HK German 3 Position (0,1,F) Navy Ambidextrous Trigger Group Complete $565

HK German 3 Position (0,1,F) Navy Clipped & Pinned Housing $135

HK German FBI (0,1) Clipped & Pinned Housing $135

HK German SEF "Navy Style" Clipped & Pinned Trigger Housing $135

HK German SP-89/MP5K Clipped & Pinned SEF Trigger Housing $135

HK SEF Longer Axle Selector Lever (Needed For Any Of The Polymer SEF Type/Style Grip Housings) $40

HK SEF Shorter Axle Selector Lever (Will Work With TheMetal Trigger Housings Only ) $10

HK Ambidextrous Left Side Selector Lever Choose From The Choices Listed Below $119 Each

FBI 0,1 Safe Semi Only       

 3 Position Navy (0,1,Full)   

4 Position Burst (0,1,2/3,Full) 

HK German Ambidextrous Extended Left Side Safety Selector Lever Choose From The Choices Below $129 Each  

FBI 0,1 Safe/Semi Only       

3 Position Navy (0,1,Full) 

4 Position Burst (0,1,2/3,Full) 

HK Ambidextrous Selector Lever Right Side Fits All Of The Ambidextrous Trigger Groups $50

HK German 9mm Barrel Flute Cleaning Brush $30

HK Chamber Face Cleaning Brush $30

HK Contract MP5K-N PDW Barrel New In The White. Your Choice Threaded 1/2 X 32, 1/2 X 28 Or Non Threaded $345

HK German MP5K / SP-89 barrel Exc shape $145

MP5 K F/A Bolt Group Complete (With All K Upgrades) $595

HK German MP5K Newer "F" Style Contour Full Auto Bolt Carrier $295

HK German MP5 F Bolt Head Complete Will Work On Any 9mm HK. $275

HK 100 Degree Locking Piece (Replaces The #16 LP) Now The Standard Locking Piece For The MP5K/SP89 $75

HK Factory #28 80 Degree Locking piece (For use w/ suppressor) $145  

HK  MP5K / SP-89 Recoil Rod Assembly Complete $55

HK German MP5 K Vertical "K" Grip $65

HK Contract MP5 K Vertical "K" Grip $50

Surefire Tri-Rail For MP5K / SP-89's / Clones $175

Surefire Tri-Rail Right Side View

Surefire Tri-Rail Bottom Angle View

Knights Armament Factory NIB Vertical Grip Fits Any Standard Rail System $50

HK Folding Stock Complete For MP5K $125

HK German MP5K / SP-89 End Cap W/ Sling Loop $98

MP5K / SP-89 Steel End Cap W/ Buffer $35

Replacement/Spare Buffer For Choate End Cap Or Rear Stock $5

MP5/94 3 - Point Sling Factory HK Green $65

HK German Ambidextrous Factory Sling (these have 2 sling hooks vs. 1 like the 3-point) Best Used W/ Ambidextrous Sling Pins $65

Best Optic Choice For The MP5 Platform & Fit Any Of The Scope Rails Offered. HK Parts Gives Them 2 Thumbs Up! This Is What We Use & We Have Tried Them All.

NIB Eotech 512 Uses AA Batteries $399

NIB Eotech 552 Uses AA Batteries Has Night Vision Settings $479

NIB Eotech 511 Uses "N" Batteries $359

NIB Eotech 551 Uses "N" Batteries Has Night Vision Settings $419 

Order Online With Out Secure Shopping Cart

 Don't See What You Need? Contact Us We May Have It.

  Adam@hkparts.net 

 801.440.5060

 


 

Home

Contact & Order Info

Services & Consulting

Factory New German HK Parts

HK MP5 / HK 94 / MP5SD / Clones

HK MP5K-PDW / MP5K / SP89 / Clones

HK MP5/10, MP5/40 & MP5/.357

HK93, 33, 33K & 53 & Clones

HK 91, G3, G3K & 51 & Clones

HK PSG-1 / HK MSG-90

HK 21 / 21E / 23E

HK UMP 9 / .40 / .45 & USC .45

HK G36 / G36K / G36C & SL8

HK 416 / HK 417

HK Pistol Parts / Mags & GSG-5

Pre-owned German HK Parts

Non-HK Parts