.45 Cal - Micro Comp - .578 X 28

Our Products: HK Pistol Parts > HK USP Variants > HK USP 45, USP 45 Tactical

SKU: HKP-18211

.45 Cal Tactical Micro Comp For Barrels - .578 X 28 Right Hand Threads

Made from aircraft grade billeted 7075 grade III hard anodized aluminum

If you have a 578 X 28 threaded pistol barrel then the .45 cal micro comp will work perfectly. With the addition of the micro comp this adds a little over .5" of an inch to the overall length. However this comp will diminish recoil to nearly nothing and reduce most of the muzzle climb. This is the most effective pistol comp ever made for the HK series of firearms. The HK comp will keep your gun shooting flat and followup shots faster than ever before. This comp was designed specifically for the HK .45 cal series of firearms but will work with many other firearm applications if the barrel is threaded 578 X 28 threaded barrels.

HK45, HK45 Tactical
HK USP .45 Tactical, USP Tactical
HK USPC Tactical, HK USCP Tactical
Many other pistol caliber barrels in .578 X 28 such as Glock, Sig, etc.

Dimensions: Length (installed) .60" X Width .75" X Height .80"

Install steps:

1. Make sure, firearm is clear & unloaded...triple check to be sure firearm is "unloaded & safe".

2. screw micro comp onto barrel all the way until fully screwed on and/or stops

3. Back off & unscrew the comp as little as possible to time the 3 ports at the 12 o'clock position

4. Make sure the comp is timed with the 3 oval sized ports at 12 o'clock

5. Add a drop of blue loctite to the threads of each set screw (red loctite or rockset are even better)

6. Tighten down set screws 1/4 turn at a time and rotate between them 1/4 turn at a time with the hex tool provided but do not over tighten with the provided set screw wrench (make sure the comp remains timed)

7. Using a torque wrench set at 12 pounds. Do not over tighten. The torque setting is sufficient.

8. Allow the loctite/rockset to cure for a few hours before taking firearm to the range

Please note: spare set screws are included as well as the allen wrench for the set screw.

Condition: New

Origin: USA

Caliber: .45

Section: Pistol Slide Parts

Type: Barrel Accessories

Sub-Type: Micro Comp

Price: $69.95

In Stock

Quantity

.45 Cal - Micro Comp - .578 X 28

.45 Cal - Micro Comp - .578 X 28	.45 Cal - Micro Comp - .578 X 28	.45 Cal - Micro Comp - .578 X 28	.45 Cal - Micro Comp - .578 X 28
.45 Cal - Micro Comp - .578 X 28	.45 Cal - Micro Comp - .578 X 28	.45 Cal - Micro Comp - .578 X 28	.45 Cal - Micro Comp - .578 X 28
.45 Cal - Micro Comp - .578 X 28
(Click to see larger image and other views)

Related Items Others Found Useful.

B&T Offset 45 Degree Mount For Aimpoint Micro - Picatinney Price $129.95 Micro Comp- 9mm 1/2 X 28 - VP9, P30/P30L Tactical Price $49.95 .578 X 28 Thread Protector HK45, H45C, USPC, Glock, Sig, Etc Price $14.95 $ Micro Comp - 9mm 13.5 X 1 - VP9, P30/P30L Tactical Price $49.95 4 Prong Pistol Flash Hider .578 X 28 RH Price $74.95 Micro Comp - .45 Cal - 16 X 1 LH Metric Price $69.95 .45 Cal - Micro Comp - .578 X 28 Price $69.95 HK Mark 23 6.02" Threaded Barrel .578 X 28 - US Price $269.95

.45 Cal - Micro Comp - .578 X 28

Our Network:

Your Account:

Customer Service:

Product Reviews

Write your own review

.45 Cal - Micro Comp - .578 X 28

Our Network:

Your Account:

Customer Service:

HKParts Mailing List